Trending Now
GAOA Merchandise: Order yours today!
Aileron Servo Tabs and Aileron Trim
Aileron Servo Tabs
I have designed and built some servo tabs that can be added to the ailerons after the fact to reduce the aileron...
Aileron Riveting for Solo Riveters
Riveting the top skins to the aileron nose ribs as described in the builder’s manual is pretty awkward (if not impossible) for solo riveters,...
Composite Joint Testing
I recently conducted a series of destructive tests to learn more about the factors which affect integrity of builder-fabricated fiberglass joints, and I think...
Engine Break-in
Break-in of an engine refers primarily to the initial phase of operation in which the piston rings will "seat" against the cylinder walls.
Run-in refers...
Alaska to Oshkosh, Part 3
Plenty has been written about Oshkosh so I will not say much about AirVenture 2019 except it was awesome. It is weird to reminisce,...
![Photo: Bidgee [CC BY 3.0 (https://creativecommons.org/licenses/by/3.0)]](https://glasair-owners.com/wp-content/uploads/2019/03/Poor-weather-for-flying-100x70.jpg "Flying In Poor Weather")
