Trending Now
GAOA Merchandise: Order yours today!
GlaStar and Sportsman Rudder Construction Tips
Tip fairing: You may need to cut the rear of the rudder tip fairing off if it is too long and glass on a...
GlaStar Static Port Reverse-Engineered
A number of builders have been wanting to get the exact dimensions for the GlaStar static port that was once available from Stoddard-Hamilton. After...
Service Bulletin for Dynon Heated Pitot Tubes
Applicability and Affected Equipment
This bulletin affects the Dynon Avionics Heated AOA/Pitot Probe (p/n 100667-000).
Description
Dynon Avionics has received reports from pilots who have experienced degraded...
Glasair I Flap Ratchet Plate
Submitted by Stan Gorman
Flap actuation is much easier with this "saw tooth" ratchet plate, especially 35° and 50° position.
Note: Glasair II & III ratchet...
Independence, Oregon Fly-in Set for August 14-16 2015
The Fly-in at the Independence State Airport, 7S5 is coming up on August 14-16 2015
For details and registration: www.eaa292.org. Ted Setzer will likely be...
