Trending Now
GAOA Merchandise: Order yours today!
Aileron Riveting for Solo Riveters
Riveting the top skins to the aileron nose ribs as described in the builder’s manual is pretty awkward (if not impossible) for solo riveters,...
Building a Workbench & Wing Jig
Here are a few tips on building a suitable workbench and wing jig for the GlaStar and Sportsman submitted by our members.
Workbench from the wing...
Canopy Door Seals
Written by Bob Buckthal, Glasair II-S FT
My canopy/doors fit perfectly. And then I installed the door seal and the doors wouldn’t close. After thorough investigation...
Glasair III Horizontal Stabilizer Angle of Incidence
There has been some question among our builders as to the proper horizontal stabilizer position relative to water line 100. Through our investigations we...
Third Time Across Australia
Sue and I have twice taken the GlaStar on flying safaris across Australia. In those trips we flew as tag-alongs with Stawell Aviation. This...
![Photo: Bidgee [CC BY 3.0 (https://creativecommons.org/licenses/by/3.0)]](https://glasair-owners.com/wp-content/uploads/2019/03/Poor-weather-for-flying-100x70.jpg "Flying In Poor Weather")
